Captain Marvel Star Tree Topper 3D Printer Model
The file 'Captain Marvel Star Tree Topper 3D Printer Model' is (obj,stl) file type, size is 72.7KB.
The file 'Captain Marvel Star Tree Topper 3D Printer Model' is (obj,stl) file type, size is 72.7KB.
This tree topper was designed to look like star on Captain Marvel's costume--which, let's face it, looks like a holiday tree topper. If you put this on your tree and no one knew you were a Marvel fan before, your secret would still be safe.
To create this Thing, you'll need to print two sides and two pegs. The pegs fit pretty snuggly and were designed so that the star could snap together without glue, so you might need to resize them by a few fractions of a millimeter for your 3D printer, or file them before using (you could also size them down farther and use glue, or use glue and pieces of dowel).
When using the provided pegs, the two sides aren't meant to come up flush against each other. There should be space for a piece of wire to be twisted around the bottom peg and come out the bottom of the star, so that it can be attached to a tree. (You'll want to twist the wire around the peg before you completely snap the pieces together, however.)
For your convenience, I've provided files in both STL and OBJ format with:
| 1_peg.obj | 2.2KB | |
| 1_peg.stl | 1.6KB | |
| 1_side.obj | 38.2KB | |
| 1_side.stl | 32.9KB | |
| 2_pegs.obj | 4.5KB | |
| 2_pegs.stl | 3.2KB | |
| captain_marvel_star_tree_topper_1_side_+_1_peg_print_2.obj | 41.0KB | |
| captain_marvel_star_tree_topper_1_side_+_1_peg_print_2.stl | 34.5KB | |
| captain_marvel_star_tree_topper_complete.obj | 83.3KB | |
| captain_marvel_star_tree_topper_complete.stl | 68.8KB |
