I had lost the original caps, which were too loose and could be easily removed, and the foam wrapped around the bar was beginning to leave.
I designed these caps on Fusion 360, they can be tightened once it's in the handlebar, thanks to a M3 screw and an insert.
It works very well and I don't think they will come off.
You'll need a M3 screw (~27mm long) and a M3 heat insert (∅4mm, length 3mm).
| Cap_left-handed_thread.stl | 381.8KB | |
| Cap_right-handed_thread.stl | 381.8KB | |
| Expander.stl | 39.1KB | |
| Gripper_long.stl | 45.2KB | |
| Gripper_short.stl | 45.8KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
