This is a Remix of the Cap for Cutters by Profi550 https://www.thingiverse.com/thing:5454654
Originally I wanted to add some knurling to the cap so I could remove it easier. However, this lead down a path to a complete redesign.
My goal of this redesign was to have a semi-tight fitting cap that would hold the cutters completely closed or very close to that. I also moved the flex join because after a few days the original cap started to expand and would not hold the cutters completely closed. This may have been due to my filament choice of PLA.
The Ender 3 cutters appear to be very similar in design to the Xuron Micro-Shear but I have not tested this.
NOTES:
The STL files were exported using the highest settings possible.
The Parasolid .X_T files are included for easier modifications or remixes.
I had to use a brim for the Klein and Ender 3 Cutters and a raft for the Xuron Maxi-Shear
| Cap_for_Cutters_Ender_3.stl | 68.5MB | |
| Cap_for_Cutters_Ender_3.x_t | 528.8KB | |
| Cap_for_Cutters_Klein.stl | 75.6MB | |
| Cap_for_Cutters_Klein.x_t | 647.4KB | |
| Cap_for_Cutters_Xuron_Maxi_Shear.stl | 72.5MB | |
| Cap_for_Cutters_Xuron_Maxi_Shear.x_t | 523.2KB |
