Canyon Aero Handle Bar Quad Lock Mount 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:120.7KB

The file 'Canyon Aero Handle Bar Quad Lock Mount 3D Printer Model' is (stl) file type, size is 120.7KB.

Description Files (2)

Summary

This mount will hold a quad lock mount and extend it beyond the handle bar. Requires a quad lock mount with compatible phone case.

Pictures were taken with the mount installed on the bike in a vertical orientation, so they may not reflect the best angles. They should provide enough details to show how the mount should be mounted.

Prints in two pieces, with minimal support.

Requirements:

  1. 3 M5x30 BHCS
  2. 3 M5 hex nuts
  3. 2 M4x20 BHCS
  4. Quad lock mount (Recommend the vibration mount)

Installation:

  1. Joint the two pieces, along with the quad lock (It should hopefully be obvious how the pieces are mated together), using the 3 M5x30 screws. This should lock in the quad lock mount. Be sure to adjust the angle of the quad lock mount at this point.

  2. Attach the mount to the bike using the two M4x20 screws from underneath the handle bar.
qLockLeft.stl 209.5KB
qLockRight.stl 232.6KB

Tags

You might also like