Inspired by the Dispo Lenses you can find on places like Etsy.
This is a remix of the "Canon EOS-M Camera Cap by submersible_raccoon". I modified the model to add space to fit a "kodak power flash disposable camera" lens. I increased the length of the frame accommodate a sharper focal length. On my Canon M50 II, it's sharpest at about 35-50mm. Moving the lens further away will bring the focus closer at the cost of losing sharpness further away from the lens.
You might have to modify the position of the lens for your camera. It fits the EF-M mount / RF-4 body cap. You can sand/heat the opening and insert your lens after trimming the excess plastic. I also increased the tolerance on the locks to accommodate my printer's variance.
I used Blender to modify the STL, happy to share the file with modifier pre application if someone wants to modify the size.
Note: The thumbnail is an older revision and is missing the ridges and has a taller frame (the file is named lens-taller-no-ridges-needs_sanding.stl), I'd recommend trying out the "lens_final.stl" first instead.
| lens-final.stl | 126.3KB |
