Cannagar Press Form Small - 8mm

Hey guys, have you heard of the Cannagar press form? This ingenious 3D-printed mold makes crafting your own Cannagars super easy and fun! With just a few steps, you can create your own Cannagars, and the result is perfect every time!

Instructions:

1. Prepare your cannabis and finely grind it. Tip: The moister and stickier the cannabis, the better.
2. Assemble the two mold halves and secure them with the two holders.
3. Place the skewer in the center of the mold to create an air channel.
4. Fill the cannabis into the mold gradually and use the pusher to pack it evenly and firmly.
5. Allow the mold to sit for several hours or overnight in a cool, dark place to allow the Cannagars to properly cure. Tip: Relative humidity should be between 55-65%.
6. Remove the holders, carefully open the mold, and remove the finished Cannagars. Tip: Gently roll the Cannagars back and forth to release them.
7. Place the Cannagars in a long paper or blunt wrap and roll them tightly. Tip: Add Dry Sift, Rosin, or extract inside and outside as desired.
8. Carefully remove the skewer. Tip: Loosen the skewer by gently twisting it back and forth.

Legal Notice and Disclaimer:
The use of this 3D-printed mold is at your own risk. Please adhere to the applicable laws and regulations in your country or region regarding the cultivation, possession, and consumption of cannabis products. The Cannagar press form is intended solely for the production of cannabis cigars and should not be used for illegal purposes. The developer assumes no liability for improper use or the legal consequences of using this 3D-printed mold.