Candy Machine Remix 3D Printer Model
The file 'Candy Machine Remix 3D Printer Model' is (stl) file type, size is 690.6KB.
The file 'Candy Machine Remix 3D Printer Model' is (stl) file type, size is 690.6KB.
This is a remix of a remix. I don't want to take away from the original designer or re-mixers. Simply because they (mostly the original designer) have put a lot of their own time and skill into this. It truly is amazing and I am happy that they shared their time.
I made changes to the collar, flap, coin face (was not centered and caused binding), clips (too tight for me and caused me to break coin face tabs; could be my body print that caused tightness), and added a back hatch which I couldn't find for this short version.
I printed the main body at 8% infill, .2 layer height, with support (3 dense layers). It took the CR-10 82 hours to print (just the body). I was nervous as a tick. But I have a backup power supply which does make you feel more at ease. If I had to print it again I would print with 5 top and bottom layers just to lose the honeycomb effect and product removal (from bed).
| Candy_mach_Flap.stl | 41.5KB | |
| Coin_face_remix_rev.stl | 178.0KB | |
| collar_lock.stl | 57.5KB | |
| Large_Jar_adapter_bushing.stl | 102.0KB | |
| Large_Jar_Collar.stl | 145.6KB | |
| NewDualCoinCam.stl | 163.5KB | |
| NewDualDrum_bubbelgum.stl | 149.2KB | |
| NewLocks.stl | 310.1KB | |
| NewShortBody_KingRahl.stl | 1.8MB | |
| New_Clips_rev.stl | 7.1KB | |
| Short_body_hatch.stl | 61.8KB | |
| VEND-CoinCamPlate.stl | 40.9KB | |
| VEND-Collar.stl | 118.1KB | |
| VEND-Knob.stl | 79.7KB | |
| Vend_Pawl_rev.stl | 13.9KB |
