Candy Dispenser Auger For 4 Inch PVC Pipe 3D Printer Model
The file 'Candy Dispenser Auger For 4 Inch PVC Pipe 3D Printer Model' is (stl) file type, size is 545.8KB.
The file 'Candy Dispenser Auger For 4 Inch PVC Pipe 3D Printer Model' is (stl) file type, size is 545.8KB.
My Candy Auger I designed to fit into a piece of 4 inch PVC pipe.
Other parts required:
suitable length bolt
4 nuts
a bearing from a fidget spinner
4 inch PVC pipe
Duct tape
Cardboard (to make a candy reservoir)
Motor and control circuit (optional, you can use the crank if you don't want to use a motor)
You will need to cut a 6inch long by 5 inch wide piece out of the pipe.
The bearing support will need to be taped or glued into place.
see my you tube channel for details: https://www.youtube.com/watch?v=vnOJjVsSS0k&t=8s
| Candy_Dispenser_Auger.stl | 191.5KB | |
| Candy_Dispenser_Auger_bearing_mount.stl | 89.1KB | |
| Candy_Dispenser_Auger_crank.stl | 48.1KB | |
| Candy_Dispenser_Auger_shim.stl | 14.1KB | |
| Dragon_dispenser_head.stl | 950.9KB |
