This is a classic candy cane Christmas tree ornament. You may also be interested in my Christmas Ornaments Collection. I will be uploading several more ornaments and other Christmas related files. Follow me to be notified on your dashboard.

If you download or collect this model, please “like” it. Thank you.

This ornament is 2.2mm thick. The backing is 1.6mm and the top red layer is 0.6mm. I printed it with a 0.2mm layer height, giving it a total of 11 layers. To print the top in a different color, edit your .gcode file and search for the line "; layer 9", without the quotes. Insert the code "M600" on a new line before or after this line. This will pause your print and probably retract your filament, allowing you to change to a different color. Check your printer's firmware documentation for how it handles the M600 code.

If you are using Simplify3D, you can enter the following code in the "Additional terminal commands for post processing" box on the "Scripts" tab of your Process file.

{STRIP "; postProcessing,"}
{REPLACE "; layer 9," "M600nG92 E0n; layer 9,"}

Try to use the same type of plastic for both colors. These were printed in PETG plastic at 240C and 75C printbed.

Don't forget Christmas Tree Ornament Hooks! I like these because they snap on and off.

This is a great ornament container-organizer.

I also like these Xmas tree extension cords with a built-in foot switch. It has two lights by the switch to indicate unplugged, plugged in but turned off and plugged in and turned on.