Candle Vanity Tray 3D Printer Model
The file 'Candle Vanity Tray 3D Printer Model' is (stl) file type, size is 2.3KB.
The file 'Candle Vanity Tray 3D Printer Model' is (stl) file type, size is 2.3KB.
This is a 40cm x 13cm candle tray my friend requested I design for her washroom. It is designed to print in two parts, sized suitably for printing on an Ender 3.
I used triangular fittings, which will need some minor filing before gluing the parts together. Supports are not essential due to the small size of the fittings.
I printed it with a 0.6mm nozzle at 10% infill and 0.32 resolution to save a bit of time. It's just being used as a decorative dish for washroom display in my case, after all. That used just over 300g of PLA and each part took just under 8 hours oat 50mm/sec. Add more infill and/or add walls when slicing
You'll probably want some filler/primer at the very least to cover the connection line. I also used some Krylon fake stone spraypaint on top of the filler/primer to give it a little character and make it look more solid than it is.
| Candle_Tray_1.0.stl | 5.3KB | |
| Candle_Tray_1.0_1.stl | 5.1KB |
