Candle Stick Holder 3D Printer Model
The file 'Candle Stick Holder 3D Printer Model' is (stl) file type, size is 7.7MB.
The file 'Candle Stick Holder 3D Printer Model' is (stl) file type, size is 7.7MB.
This is a candle stick holder made on fusion 360. If your printer volume is not big enough, print the cup and holder separate. Print the Cup as it is because it is the right size to fit the average size candle. But you can enlarge the Candle Stick holder to what ever size you want and just glue the cup on top. I recommend printing the Candle Stick Holder at 175% which is a nice size in proportion to the size of a candle. Keep in mind you can always cut the candle down to a size that looks good if you want, the print does not have to be big. If you want to have a big candle stick holder but your printer is not big enough, you can go into Tinkercad (a very simple design website) and cut the holder into multiple pieces and print them separately.
| Candle_Stick_Holder_3rd_fusion_360_desing.stl | 9.7MB | |
| Candle_Stick_Holder_no_cup_on_top.stl | 10.3MB | |
| Cup_for_CSH.stl | 124.9KB |
