A baroque style candle holder for candles with 22 - 24 mm diameter.
You'll need supports for the legs and the top holder. We have printed the body in PLA without supports, maybe you'll need some, that depends on your printer.
For the top holder we used PETG, because it's more heat resistant than PLA.
We recommend to print the legs upwards, as given in the STL-file.
There is a hole in the bottom of the main-body. We put a steel bolt into this hole to lower the center of gravity. But you could also use sand or bearing balls.
Have fun and if you have questions, just ask!
| body.stl | 11.2MB | |
| bottom_cap.stl | 1.7MB | |
| holder.stl | 4.7MB | |
| leg.stl | 953.2KB |
