Please consider leaving a like if you download!

Remix from: https://www.thingiverse.com/thing:992319.

Ensure you print the right size for the can size of the country you live. If you would like one for a different height can just message me on here with the can height and I will add one for said can size. The base part works with all sizes as it doesn't interface with the can.

Sizes Added:

340ml, 11.5oz

355ml, 12oz - US

375ml or 12.7oz - Australia

Print without supports. Print with 25% triangle infill and 3 perimeters. This results in the ideal amount of flex so that the can is easy to click in but still holds tight. Optional but recommended: schedule a filament colour change on the first layer of the text to make it pop.

Changes from original:

Added ring on the bottom to prevent tip-overs while still maintaining a coherent aesthetic (Printed separately). You can print this ring with different filament for more customisation/personalisation. When printed with a decent printer, this ring is a tight fit, though you can glue it with a tiny dab of super glue on each side if you desire.

Tightened up groves that fit the can: the can is a very snug fit and snaps in with a satisfying click and doesn’t rotate or move around on the base easily, though it is still easy to remove.

Made base slightly thicker to not have it able to bend as much. Adds to durability and also enables a tighter grip on the can as mentioned above.

Surprisingly satisfying to drink from the can using this!

Buy on Etsy: https://www.etsy.com/au/listing/1135558326/can-handle-customisable?click_key=d2d548b4bdd5d246f4c00170cedabde4a42ac061%3A1135558326&click_sum=745f93b6&ref=shop_home_active_1&frs=1