remesh if you have problem with original files
-added cap_with_hole_remesh.stl,capremesh.stl
-added platform_remesh_x1.stl
i found "Simple Camera Slider by PrimarilyPrint3d,"
with 6 ball bearing ,i see much more potential than just a gopro slider.
so i overhaul it
change GoPro mount to hole for tripod screw
any camera or phone holder with standard tripod mount will do now
use 26mm outer diameter pipe instead of 22mm for sturdy purpose
optional support so you can have sturdy rail like metal tube build on a ridiculous long pvc pipe build
design a new crank to use much less meterial
optional pilot hole for drilling and screw
| bearing_post_x6.stl | 127.3KB | |
| cap_.stl | 374.6KB | |
| cap_remesh_.stl | 23.3MB | |
| cap_with_hole.stl | 352.0KB | |
| cap_with_hole_remesh.stl | 21.4MB | |
| crank_a.stl | 27.9KB | |
| crank_b.stl | 52.9KB | |
| crank_c.stl | 20.3KB | |
| ideal_screw.stl | 197.1KB | |
| peg_x2.stl | 83.9KB | |
| platform_remesh_x1.stl | 11.1MB | |
| platform_x1.stl | 241.2KB | |
| SUPPORT_optional.stl | 52.1KB | |
| wheel_x2.stl | 733.6KB |
