Here is the camera rig for my automated photogrammetry system. Firmware that controls the camera rig, the turntable + trigger a camera will be available soon. So it will be a 100% automated photogrammetry/3dscan system.

The .rar file is somewhat messy (it contains several copies of identical parts). Many of them are very small so dont be discouraged by the number of parts.
Don't forget to pause the print to insert M3nuts when printing the base.

https://www.youtube.com/watch?v=BiwQFGGy_2k

Parts:
Nodemcu v3 - 1 pcs (without headers is recommended).
Stepper driver breakout boards - 3 pcs
https://www.aliexpress.com/item/1005002915948304.html?spm=a2g0o.detail.0.0.2c68PMQqPMQqd4&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.362094.0&scm_id=1007.40050.362094.0&scm-url=1007.40050.362094.0&pvid=56cc5da0-62c1-447f-94d6-6056061ffaec&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.362094.0,pvid:56cc5da0-62c1-447f-94d6-6056061ffaec,tpp_buckets:668%232846%238109%231935&isseo=y&pdp_npi=4%40dis%21SEK%2120.10%2112.88%21%21%211.92%211.23%21%402103011717044262291311595e9316%2112000022769978764%21rec%21SE%21129135134%21
4 pin male JST XH connectors - 2/3 pcs
5 pin female JST XH connectors - 2 pcs (optional)
voltage regulator LM2596
12v dc socket
https://www.aliexpress.com/item/1005006234168134.html?spm=a2g0o.productlist.main.37.a85b4adf1g2mg9&algo_pvid=4655276d-02d7-41f4-bdde-06343cc30ac1&algo_exp_id=4655276d-02d7-41f4-bdde-06343cc30ac1-18&pdp_npi=4%40dis%21SEK%2124.16%2112.08%21%21%2116.54%21%21%40211b813c17044289361883599e8c70%2112000036397459308%21sea%21SE%21129135134%21&curPageLogUid=MbHGLG3fPqgW
Bearing 683zz - dont remember how many. I think a little more than 10 but less than 20.
stepper driver a4988 - 3 pcs
6 mm balls for bearing of planetary gear.
5v 28byj stepper motor (converted to bipolar) - 2 pcs
nema 17 stepper motor - 1 pcs
6 mm. Gt2 belt - length depends on the length of the 20mm square tube.
open builds 4 x wheels set - 1 pcs
open builds 2040 vslot aluminium extrusion - optional length
https://www.aliexpress.com/item/1005005445560934.html?spm=a2g0o.productlist.main.65.4e4a754b6YzA7i&algo_pvid=11c20504-fa59-416b-bd97-cf7004df52f3&algo_exp_id=11c20504-fa59-416b-bd97-cf7004df52f3-32&pdp_npi=4%40dis%21SEK%2157.48%2133.91%21%21%2139.34%21%21%402103956b17044282438811560e09d0%2112000033109531010%21sea%21SE%21129135134%21&curPageLogUid=gjBSEDe2fBte
20x20 mm. square tube for the horizontal axis - optional length

In addition to these parts, you will also need the turntable, The way this system works, the turntable can operate independent of the camera rig, but the camera rig needs the turntable online within wifi range in order for the camera rig to work.

M3 screws - many pcs
M3 nuts - many pcs
M5 screws - 2 pcs
M5 nuts - 2 pcs