Camera Mount 360° (Arduino ESP32-Cam) V3 3D Printer Model
The file 'Camera Mount 360° (Arduino ESP32-Cam) V3 3D Printer Model' is (stl,3mf) file type, size is 2.4MB.
The file 'Camera Mount 360° (Arduino ESP32-Cam) V3 3D Printer Model' is (stl,3mf) file type, size is 2.4MB.
Hello,
Update 4 : new foot with antenna mount 6dBi:
https://www.banggood.com/3pcs-2_4GHz-6dBi-50ohm-Wireless-Wifi-Omni-Copper-Dipole-Antenna-SMA-To-IPEX-For-Monitoring-Router-p-1214975.html?rmmds=cart_middle_products&cur_warehouse=CN
and usb micro board to plug direct a cable in:
https://www.banggood.com/10pcs-Micro-USB-To-Dip-Female-Socket-B-Type-Microphone-5P-Patch-To-Dip-With-Soldering-Adapter-Board-p-1165563.html?rmmds=cart_middle_products&cur_warehouse=CN
Update 3 : back cover much strong and doesnt fall down anymore ;)
this is a simple camera mount for ESP32-CAM,
can orientate any position and wall mount or flat surface mount.
V2 is a ring more, that you put before on the base, after you connect the case, and finally put up the ring to straighten !
So no more problem with the cable if it push on the case.
Update 2 : beter to print 40% infill because the foot of the case break easely
| ESP32-CAM-mount_360_foot_external_antenna_V3.stl | 859.7KB | |
| ESP32-CAM-mount_360_foot_V2.stl | 762.7KB | |
| ESP32-CAM-mount_360_v2.stl | 2.2MB | |
| ESP32-CAM-mount_360_v3.3mf | 1.1MB |
