Camera Holder For ZWO ASI294 Or Any ZWO 78mm To Rokinon 135mm 3D Printer Model
The file 'Camera Holder For ZWO ASI294 Or Any ZWO 78mm To Rokinon 135mm 3D Printer Model' is (stl) file type, size is 179.7KB.
The file 'Camera Holder For ZWO ASI294 Or Any ZWO 78mm To Rokinon 135mm 3D Printer Model' is (stl) file type, size is 179.7KB.
Update Fix to original design. This fixes some M4 nut holes and adds a bit tighter bight on the 78mm Camera. I included focusers I built for fine focus. I'll updater this later to ZWO EAF adapter when I can.
Camera holder for ASI294 or similar with diameter 78mm.
Dovetail for vixen
You also need this:
14x screw M4x20 Philips
3x screw M6x20 allen key
3x self-locking nut M6
6x hex nut M4
4x wing nut M4
2x screw M4x10 to14mm allen head for Camera Clamp
I printed this from PETG.
I printed Dove from PETG Carbon Fiber with a 235x235mm bed without a skirt the 10-inch dove prints fine.
For printing dovetails, I used Cubic with 80% infill 4 top, bottom, and side.
| 10_inch_Dove_Plate_Large.stl | 9.5KB | |
| ASI294_78mm_Duel_Dove_Mounts.stl | 173.4KB | |
| Rokinon135mm_Focuser_For_Doveplate.stl | 319.6KB | |
| Thumb_Screw_6mm.stl | 144.2KB |
