The file 'Callisto 2 And A Half (remix) 3D Printer Model' is (stl,skp,pdf) file type, size is 12.1MB.
This is a remix of lowbudgettech's Callisto 2. It contains changes of the original 3d models to work with alternative components and also contains some additional functional features and simplifications for the installation of the internal compoments.
There is also some PDF documentation attached that might help with the project.
You can find the BOM, print settings and additional recommendations inside the PDF.
2024-06-02 - Short update regarding sourcing situation for some components. I found an alternative PSU which seems to fit, and is available at my location, but also at US. I ordered an example and plan to have an alternative version of part D in near future.
2024-06-05 - Short update regarding PSU alternative. The new UGREEN 65w PSU (which is available in US as in DE) has arrived. It works great with Raspberry Pi and the LCD panel. I created an modified version for part D, to adapt the geometry for the PSU mount according to the new PSU. Both versions of the 3d model for part D are available. The documentation was updated regarding sourcing/BOM accordingly.
| c2h_A_front_left_dierya.stl | 2.0MB | |
| c2h_A_front_left_gim.stl | 1.9MB | |
| c2h_A_front_left_isy.stl | 2.1MB | |
| c2h_B_front_right_dierya.stl | 2.3MB | |
| c2h_B_front_right_gim.stl | 2.0MB | |
| c2h_B_front_right_isy.stl | 2.4MB | |
| c2h_C_back_left.stl | 2.4MB | |
| c2h_D_back_right_schitec.stl | 2.3MB | |
| c2h_D_back_right_ugreen.stl | 2.6MB | |
| c2h_E_top_left.stl | 1.4MB | |
| c2h_final.skp | 8.0MB | |
| c2h_F_top_right.stl | 1.3MB | |
| c2h_G_hatch.stl | 588.5KB | |
| c2h_H_lcdmount_left.stl | 148.8KB | |
| c2h_I_lcdmount_right.stl | 146.8KB | |
| c2h_J_speakermount_all.stl | 415.6KB | |
| c2h_K_hdmiboard_mount.stl | 110.4KB | |
| c2h_manual_v1dot1.pdf | 6.6MB | |
| c2h_pin.stl | 179.4KB |
