Calibration Cube With Circles – 20mm 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:7.1KB

The file 'Calibration Cube With Circles – 20mm 3D Printer Model' is (stl) file type, size is 7.1KB.

Description Files (1)

Summary

Calibration cubes are often printed as a diagnosis step when you are unable to print perfect circles. This version of such a test comes with indented and extruded circles built in to help you streamline your troubleshooting and save you having to print something else with circles after anyways.

Dimensions:

  • 20mm x 20mm x 20mm cube (+2mm to extruded circle)
  • 10mm indented hole diameter (2mm deep)
  • 10mm extruded hole diameter (8mm from inside walls)

Basically if your print comes out and it isn't a perfect cube and/or has messed up circles it is most likely one of the following issues:

  • steps per mm are off
  • belts need tightening
  • z axis is binding
Calibration_Cube_with_Circles_-_20mm.stl 38.0KB

Tags

You might also like

Astro Bot – Lost Circle/Rond Perdu 3D Printer Model
Astro Bot – Lost Circle/Rond Perdu 3D Printer Model
Loom Sampler Frame 3D Printer Model
Loom Sampler Frame 3D Printer Model
Yet Another Temperature Tower 3D Printer Model
Yet Another Temperature Tower 3D Printer Model
Testing Cube. 3D Printer Model
Testing Cube. 3D Printer Model
Paint Test Cards 3D Printer Model
Paint Test Cards 3D Printer Model
Air Spinner Dual Extrusion Version 3D Printer Model
Air Spinner Dual Extrusion Version 3D Printer Model
Overhang Test Print 3D Printer Model
Overhang Test Print 3D Printer Model
1 Layer Test Sheet Testing Calibration Calibrate Anycubic Kobra 3 Combo 3D Printer Model
1 Layer Test Sheet Testing Calibration Calibrate Anycubic Kobra 3 Combo 3D Printer Model
Printruder II – Rear Breech Loading 3D Printer Model
Printruder II – Rear Breech Loading 3D Printer Model
My Perimeter Test Method To Print At 0.05mm 3D Printer Model
My Perimeter Test Method To Print At 0.05mm 3D Printer Model
Support Z Offset Calibration Test, Stackable Petg 3D Printer Model
Support Z Offset Calibration Test, Stackable Petg 3D Printer Model
First Layer Test Square (0.3mm) 100x100mm 3D Printer Model
First Layer Test Square (0.3mm) 100x100mm 3D Printer Model
OMT² – Hex Precision Tests For Bit Holders 3D Printer Model
OMT² – Hex Precision Tests For Bit Holders 3D Printer Model
Calibration Cubes 3D Printer Model
Calibration Cubes 3D Printer Model
Barney Astronaut 3D Printer Model
Barney Astronaut 3D Printer Model
Dragonhead 3D Printer Model
Dragonhead 3D Printer Model
150mm X 150mm Layer Height Calibration Test Pattern For Flashforge Adventurer 3 (Set General Layer Height And First Layer Height To .3mm) 3D Printer Model
150mm X 150mm Layer Height Calibration Test Pattern For Flashforge Adventurer 3 (Set General Layer Height And First Layer Height To .3mm) 3D Printer Model
Vernier Scale, Skew Calibration Pattern 3D Printer Model
Vernier Scale, Skew Calibration Pattern 3D Printer Model
Basic-box 1 3D Printer Model
Basic-box 1 3D Printer Model
Surface Example 3D Printer Model
Surface Example 3D Printer Model