Replacement Strap/Handle for old Tupperware Cake Box.
Attention! Straps needs a 300x300 print bed.
The original strap of Grandma`s box was broken, so i decided to create a replacement solution.
Print grip parts one each (PLA or PETG or what ever, depending on bridging capabilities you may need support on top and bottom part)
Print strap 2x (TPU at least 5 perimeter/top-bottom layer 25% infill)
Maybe you have to de-burr the center grip part for a snugly fit.
After testfit apply glue (i recommend 2k epoxy) into the cavities of the top and bottom grip part. Use clamps or rubber-bands and press the grip-part with the two inserted straps until the glue is hard.
| Grip-center.stl | 36.2KB | |
| Grip1.stl | 333.9KB | |
| Grip2.stl | 333.1KB | |
| Strap.stl | 1.1MB |
