No, it's not an avata
Yes, it looks like it
For those interested, I took the servo pin from the LED contact. The others refused to work, although I would like at least two.
The GM2 damper is not used here, I use the original rubber bands from cinelog35, it's better than nothing, and easier than modeling all this.
And in general, it seems to me that I'm the only psychopath with a caddx moonlight and a stabilizer on an FPV drone...
Yes, this is all on the betaflight. Ainav does not allow you to remap the flight controller contacts
Video test:
https://www.youtube.com/watch?v=QCiUS0YMz30
THE BIG V8 UPDATE!
I got rid of my native softmount. This made it possible to hide the entire structure deeper into the body and make it more protected from impacts.
I am proud of this mount, everything now looks as it should, and sticks out from the body to an extremely minimal extent.
I also solved the problem with the lack of PWM contacts. Just using the ELRS EPW6 board. This board was originally designed to work with 6 pwm outputs, but with the recent elrs update we can configure 2 of the 6 contacts to work with uart, and use the rest for our unclean purposes :3
| GM2_V3.3mf | 92.2KB | |
| GM2_V8.stl | 677.1KB |
