Cablecam Mini 3D Printer Model
The file 'Cablecam Mini 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Cablecam Mini 3D Printer Model' is (stl) file type, size is 1.3MB.
mini cablecam, wifi controlled. the transmitter is a M5stick plus2. tilting it will vary the speed of the cablecam. suitable for insta 360. the receiver is an esp8266. the motors are 2 micro motors of the N30 series 1000rpm 6V.
you need a 638/5-2z bearing.
The towing pulleys have a TPU part inside which helps prevent the wire from slipping.
code:
https://github.com/pragamichele/cablecam-M5Stick
To improve the transmitter range, it is recommended to add an external antenna
N1 esp8266
N2 N30 micromotors 1000 rpm 6V
N1 driver L298N
N1 bearing 638/5_2z
N1 step up 5V + lipo carge (It takes the power from a lipo and brings it to 5V, to power the ESP, it also charges the lipo if connected to USB C.
N1 step up 9V (motor power supply)
N1 switch
A piece of aluminum 15x65x2mm
N1 M4x30 screw with nut
N1 M4x20 screw with nut
N1 spring
N3 M3x15 screw with nut
N4 M2x10 screw
A 3mm rope 30m long
| box_cablecab_1100mA.stl | 387.3KB | |
| box_cablecam.stl | 387.4KB | |
| cablecam_doppio_motore.stl | 178.3KB | |
| carrucola_cablecam.stl | 1.8MB | |
| coperchio_box_cablecam.stl | 148.2KB | |
| coperchio_cablecam_doppio_motore.stl | 103.7KB | |
| rinvio_cablecam.stl | 583.8KB | |
| tpu_carrucola_traino.stl | 80.6KB |
