Cable Glider For Kinetik Heretic Compound Bow 3D Printer Model
The file 'Cable Glider For Kinetik Heretic Compound Bow 3D Printer Model' is (stl) file type, size is 28.0KB.
The file 'Cable Glider For Kinetik Heretic Compound Bow 3D Printer Model' is (stl) file type, size is 28.0KB.
This is a replacement cable guide for the Kinetic Heretic compound bow.
It matches the original dimensions, so timing adjustment should not be necessary (but may be a good idea anyway).
-Update: While developing another item (to come) I found, that even rather small changes in the cable guide may affect the centershot on the Heretic.
On testing this new slider, I found that I have about 1 inch POI deviation to the left at 20 yards, compared to my worn out original cable glider.
So this may be worth checking.
The rod is standard (9,5mm = 3/8 inch), so it may fit other bows.
Note the small offset between the slots (one is slightly longer) and make sure to mount it in the correct orientation for maximum cable clearance.
Also: no bow press required, you can just pull it off.
| cable_glider_kinetic-Body.stl | 95.2KB |
![[HSW] Magnetic Cable Clip 3D Printer Model](https://cdn.3axis.co/assets/5e/8a/57/e6/5e8a57e6-846b-433d-b44e-99dc7c8476ae/images/320cc4d5-0025-4211-a05f-5153e7754b0e_thumb.jpg)
