This is a cable gland for your small electronics projects, or whatever!
There are three main parts:
I recommend printing the body with support due to the indexing collar on bottom surface. Everything else should be straight forward.
Once printed, the cinch fingers will need to be super glued to the body. Make sure the trapezoidal part of the fingers is upward and the tapered side inward.
The cable gland pictured was printed at 0.15mm layer height.
Secure to project box with suitable hardware.
| cable_gland_body.stl | 303.5KB | |
| cinch_fingers.stl | 9.8KB | |
| cinch_nuts.stl | 1.3MB |
