Many national standard chargers cannot be folded, and the metal part of the plug will bulge, which will crush other devices when placed in a bag. At the same time, the charging cable is not easy to store and always gets wound up, so it is designed This wire winder.

The cable winder can be installed on the metal part of the charging head, just like plugging into a socket, to protect the metal head and other devices.

You can insert both ends of the charging cable into the two holes respectively, so that the cable will not loosen by itself and is compatible with various national standard plugs.

This is what the smallest Apple 5V1A plug looks like when installed.

The thickness is 27mm, which is the same as Apple’s smallest charger.

When installed, the latest high-power charger takes up almost no increase in space compared to the charger, because the charger itself has metal protrusions​.

The model consists of two parts, making it easy to print without supports. Just install it after printing. If it's a little loose, you can put some glue on it.

国标的充电器很多都不可以折叠，而且插头金属部分还会凸起，装在包里会把别的设备压坏，同时，充电线也不太好收纳，总是绕成一团，所以设计了这个​绕线器。

绕线器可以装在充电头的金属部分，如同插入插座一般，保护金属头以及其他设备​。

可以将充电线的两头分别插入两个孔内，这样线也不会自己松开，兼容各种国标插头​。

这个是最小的苹果5V1A插头装上的样子。

厚度27mm，与apple 最小的充电器一样​。

最新的大功率充电器装上的样子，相比充电器占用空间几乎没有增加，因为充电器本身有金属凸起​。

模型由两部分组成，方便无支撑打印​。打印完装上即可，如果略松可以滴点胶水沾上​。