Cable Chain Riser Wanhao Di3 3D Printer Model
The file 'Cable Chain Riser Wanhao Di3 3D Printer Model' is (stl) file type, size is 14.2KB.
The file 'Cable Chain Riser Wanhao Di3 3D Printer Model' is (stl) file type, size is 14.2KB.
I noticed the cable chain from the extruder to the z-axis arm slopes down toward the z-axis end, this was causing one of the links to pull apart slightly.
Update you are better off using the remix of this as it improves the design :-)
http://www.thingiverse.com/thing:1421438
So I created this small riser plate, which is nice and simple and does the job perfectly. It's 22mm x 20mm x 4mm the 4 holes are 3mm, I didn't have the correct length screws so used nuts as spacers where necessary (as the photos show).
This was printed at 200 microns and 50% infill, taking less than 15 minutes to print and fit.
| Cable_Chain_Riser.stl | 80.0KB |
