The file 'Cabinet For Printer, Dry Storage For Filament With Easy Change System And Tooling. 3D Printing On Wheels – Workstation 3D Printer Model' is (stl) file type, size is 623.0KB.
Workstation: Easily change your filament, keep it stored ready for use, dry, warm and untangled.
Wooden (MDF) cabinet with heater consisting of 2 resistors, fuse and a thermostat. Added a dehumidifier.
Filament ready on 10mm rods with (nylon) bearings.
Feed through for 11 filaments on the left AND 11 on the right side (holes) with holding system. Total feed of 38 filaments simultaneously readily available.
Printer on top of cabinet with side walls: http://www.thingiverse.com/thing:56737
Magnetic tool holder - AKA steel ;-)
Strong small magnets
Ikea LED light
LED strips with dual (12 & 5VDC power supply)
Small no-break for printer and dehumidifier only.
Humidity and dual temperature (in- &outside temp) in cabinet.
| 175mm_8x_filament_guide_through_wider.stl | 132.2KB | |
| 25x10x10washer.stl | 98.4KB | |
| 52.2x25_Spool_Bearing.stl | 90.4KB | |
| corner_bracket_holder.stl | 22.0KB | |
| glass_door_stop.stl | 53.0KB | |
| interior_corner_bracket.stl | 98.4KB | |
| left_filament_through_and_holder_for_175mm_11x.stl | 513.0KB | |
| m10_rod_holder.stl | 31.2KB | |
| Makerbot_powersupply_bracket.stl | 2.5MB | |
| rightAngleBracket.stl | 350.8KB | |
| Right_filament_through_and_holder_for_175mm_11x.stl | 512.6KB | |
| switch_mount.stl | 38.7KB | |
| thermometer_stand.stl | 28.9KB |
