The C-17 Globemaster III is a large military transport aircraft that has been in service around the world for the last 30 years.
Created as a paid commission for ChmNrd, the same legend who commissioned the
C-130 Hercules Kit!
Included is the standard fit, same as past kits, but also a tighter (labelled Ti) variant as I know some of you find them too loose!
For those uninterested in the card format, there are frameless variants included, alongside the individual part files!
Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit.
The model parts are 1.8mm high, which is not divisible by 0.16 for example!
Be sure to print with 100% infill for it to hang straight as the weight distribution is sensitive!
Makes greatly appreciated, always glad to see them! Happy Printing!
Interested in selling?
All files are marked as non-commercial along with any remixes created from them.
If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships!
| C-17_Connector.stl | 13.9KB | |
| C-17_Engines-A.stl | 24.1KB | |
| C-17_Engines-B.stl | 24.1KB | |
| C-17_Fuselage.stl | 42.1KB | |
| C-17_Kit.stl | 985.5KB | |
| C-17_Kit_Frameless.stl | 148.7KB | |
| C-17_Tail.stl | 10.2KB | |
| C-17_Wing-A.stl | 17.4KB | |
| C-17_Wing-B.stl | 17.4KB | |
| Ti_C-17_Connector.stl | 13.9KB | |
| Ti_C-17_Engines-A.stl | 24.1KB | |
| Ti_C-17_Engines-B.stl | 24.1KB | |
| Ti_C-17_Fuselage.stl | 42.1KB | |
| Ti_C-17_Kit.stl | 986.1KB | |
| Ti_C-17_Kit_Frameless.stl | 148.7KB | |
| Ti_C-17_Tail.stl | 10.2KB | |
| Ti_C-17_Wing-A.stl | 17.4KB | |
| Ti_C-17_Wing-B.stl | 17.4KB |
