Bycicle Bike Model Functional Design Merida Inspired 3D Printer Model
The file 'Bycicle Bike Model Functional Design Merida Inspired 3D Printer Model' is (stl) file type, size is 8.2MB.
The file 'Bycicle Bike Model Functional Design Merida Inspired 3D Printer Model' is (stl) file type, size is 8.2MB.
This is a little functional bycicle model. The Design was inspired by a Merida bycicle as the real one has hidden lines and so its easy to recreate it for 3D printing.
Printing instructions:
All parts are saved in the optimal printing direction, so no need to turn them while positioning.
The final modell is 20cm long, you can scale it down to 70%, but then its recommended to print all parts in high quality.
Depending on your printer you have to grind some portions of the smaler partl (Axle, pedals, pedal arms and saddle bar to make them fit and snap together properly.)
Acttivate supports on the two frame parts, all other parts can be printed without supports.
Use print plate adhension "brim" for all small parts to have them stick to the bed.
Assembly instructions:
See the Pictures and Use a little Rubber Band as the Chain. Bend together the Dirks in the stand a little If it don't hold the Bike properly in Position.
BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:
The files are for private use only!
You are allowed to print parts from them for your personal use only!
You are not allowed to use this files or parts you printed with the use of this files of it in any comercial way!
If you are distributing Pictures from parts or models you build with theses files you are only allowed to to so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your Fotos!
You are not allowed to copy or distribute them in any way!
You are not allowed to sell them or parts you printed from them or models you build with the use of this files!
| Axle.stl | 19.6KB | |
| Fork.stl | 1.3MB | |
| Frame_left.stl | 1.6MB | |
| Frame_right.stl | 1.6MB | |
| Front_gear.stl | 1.0MB | |
| Front_wheel_left.stl | 2.4MB | |
| Front_wheel_right.stl | 1.9MB | |
| Pedal_2x.stl | 135.2KB | |
| Pedal_arm_2x.stl | 192.4KB | |
| Rear_gear.stl | 1.4MB | |
| Rear_wheel_left.stl | 2.4MB | |
| Rear_wheel_right.stl | 1.9MB | |
| Saddle.stl | 654.6KB | |
| Saddle_bar.stl | 155.0KB | |
| Stand.stl | 1.8MB | |
| Steering_horn.stl | 3.4MB |
