The file 'BvS Batman 3D Printer Model' is (stl) file type, size is 60.4MB.
Forgot to publish this... Uploaded it in January 2020, and moved on with other stuff so if something strange happens when you print it I'll probably not fix it :P
Batman V Superman inspired Batman figure. Batfleck is by far the coolest live action Batman and I needed something to stand next to my Superman model (https://www.thingiverse.com/thing:2805274).
Modelled in Mudbox and 3Ds max, rigged in Maya.
Either print the full version with a lot of support, or print the splitted version with a lot of support. Use tree support to reduce the wasted material.
I printed it in the scale that is uploaded but also tried a small print (5 cm high) just to try and that worked as well (of course with zero details but everything was thick enough to print on a 0.4mm nozzle).
If you're printing the full version that is all you need.
If you're printed the splitted version you will have to glue Part 1 and Part 2 together and then glue Batmans butt and right foot on the wall.
Pro-tip: Paint Batman before you glue him to the wall for an easier paint job :D
Batman_Full.stl | 55.8MB | |
Batman_Full_reduced.stl | 4.3MB | |
Batman_Part_1.stl | 54.9MB | |
Batman_Part_1_Reduced.stl | 5.5MB | |
Batman_Part_2.stl | 102.7KB | |
Stand_1.stl | 1.4KB | |
Stand_2.stl | 1.4KB | |
Wall.stl | 536.6KB |