Button Battery LED Holder 3D Printer Model
The file 'Button Battery LED Holder 3D Printer Model' is (stl) file type, size is 8.6KB.
The file 'Button Battery LED Holder 3D Printer Model' is (stl) file type, size is 8.6KB.
A button cell (specifically for CR 2032) battery holder, designed to attach an LED diode directly to it. This is a remix/redesign of the Atomseeker's design available here:
https://www.printables.com/model/289171-2025-coin-cell-battery-led-light
His design was for a smaller button cell. Mine are sized up to the 2032. Print in place upright, no supports needed. Feed the legs of the LED diode through the two holes in the rear of the holder, with the positive lead on the positive side of the holder. Hot glue the diode in place. The battery is friction held in place by the diode legs.
Used in the attached pictures is a battery and flickering LED scavenged from a flameless candle tea light available at in packs at any dollar store.
| LED_Button_Battery_Holder.stl | 43.0KB |
