Butterfly Magnet 3D Printer Model
The file 'Butterfly Magnet 3D Printer Model' is (stl) file type, size is 193.4KB.
The file 'Butterfly Magnet 3D Printer Model' is (stl) file type, size is 193.4KB.
I scaled it down 50% and added spaces for 3 3x1mm magnets. I had to bulk up the body to fit the magnets. You will need to add a PAUSE at the layer before the spaces are covered to add the magnets.
I also added a M600 filament change after the flat layer to give it a nicer look.
Like the original, the wings and antennae can be positioned when hot off the build plate, or later using a heat gun or boiling water to soften the PLA.
v2 - Added a bit more space for the magnets. Should be easier to insert.
Here is an example of the magnets that work with this: https://www.amazon.com/TRYMAG-Magnets-Whiteboard-Billboard-Hobbies/dp/B09MQ3JXLV/ref=sr_1_1_sspa?crid=19CBW53ISMUXT&keywords=3mm%2Bmagnets&qid=1703716913&sprefix=3mm%2Bmagnets%2Caps%2C291&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
| butterfly_magnet_v2.stl | 724.9KB |
