Butterfly Knife Trainer 3D Printer Model
The file 'Butterfly Knife Trainer 3D Printer Model' is (stl) file type, size is 1.3 MB.
The file 'Butterfly Knife Trainer 3D Printer Model' is (stl) file type, size is 1.3 MB.
I couldn't find a good one here, so I made my own in TINKERCAD xD
BASIC HANDLES are compatible with ROCKET-FISH BLADE
FLASH HANDLES with WATER BLADE
You can try combine them but I made so many versions then I dont know if they work properly together
SCREWS:
to join blade with handles- 2x(M3x12 or M3x14mm) and 4x flat washers(little iron pads)
at the end of handles- 6x(m3x10) and 4 flat washers for each, so 24 flat washers for whole knife
(Screws and flat washers at the end of hendles give knife additional weight, it helps with better handling, its almost better then real butterfly knife)
Happy flippin GUYS
| Blade_rocket-fish.stl |
| Blade_rocket-fishchicago_crew.stl |
| blade_water.stl |
| blade_waterchicago_screw.stl |
| handles_flash.stl |
| handles_flashchicago_screw.stl |
| handles_flashflat_screw.stl |
| handles_v1.stl |
| handles_v1flat_screw.stl |
