This is my modified version of the nice butterfly from dfunk.
This version is printed FLAT on the bed. On my hotbed with glass, it pops out when cooling.
Yes, you cannot print a lot at the same time. BUT they print well with no uggly overhangs, and the wings get out like mirror thanks to the glass.
The tolerance is still too large (I already reduced it), I'll try to add a new version with smaller tolerances later.
I've not uploaded scad file, because it's in original and does not give much options (only one : thickness of wings - you're better at printing with 100% infill than playing with thickness)
| butterfly.stl |
