If you liked my wall Butterfly, you may love this. No supports required, and prints in about 2 hours. This Butterfly is hinged, and setup to print in multi-color. I've changed the body and wing pattern. The antennae are robust Printed at a .15 layer height, I printed at 2 hours 10 minutes. I designed the gaps to be loose enough to print, but not too loose that you can't scale up to about 120%. If changing filament, I recommend about 3 layers above the wing base webbing. Also, if using a filament change, I recommend increasing the normal temperature by 2-3 degrees to increase bonding. Only for the first couple of layers after the change.
| Butterfly_Hinged.stl |
