Business Card Case With Invisible Clamp – Various Sizes 3D Printer Model
The file 'Business Card Case With Invisible Clamp – Various Sizes 3D Printer Model' is (stl) file type, size is 503.9KB.
The file 'Business Card Case With Invisible Clamp – Various Sizes 3D Printer Model' is (stl) file type, size is 503.9KB.
I was looking for a simple yet functional business card case for... my business cards.
Most of the existing ones unfortunately don't have any information about the size the cards may have.
So I designed my own case and additionally gave it some "magic".
Inside of the case is a clamp that holds the cards in place. (In my case it even works with only one card left).
The current model offers place for about 15 cards, depending on the paper quality.
Not to make the same mistake I have included models for various card sizes.
If you are missing a specific size, or want a thicker/narrower design - feel free to contact me.
Available card sizes:
85 x 55 mm - TESTED
90 x 55 mm - NOT TESTED
90 x 50 mm - NOT TESTED
3.5 x 2 inch - TESTED (89 x 51 mm)
65 x 65 mm - NOT TESTED
UPDATE 2020-01-28:
I have added a slim version for each size (for about 5 cards) and made the corners a bit round.
UPDATE 2020-10-20:
Added a 65 x 65 mm version
I would appreciate to see your makes and responses - especially to the not yet tested sizes.
If you like it - leave me a tip :)
| parametric_business_card_case_3.5x2inch_v5.stl | 201.6KB | |
| parametric_business_card_case_3.5x2inch_v7_slim.stl | 278.5KB | |
| parametric_business_card_case_65x65mm_v7.stl | 284.9KB | |
| parametric_business_card_case_65x65mm_v7_slim.stl | 281.4KB | |
| parametric_business_card_case_85x55mm_v5.stl | 212.7KB | |
| parametric_business_card_case_85x55mm_v7_slim.stl | 280.0KB | |
| parametric_business_card_case_90x50mm_v5.stl | 199.5KB | |
| parametric_business_card_case_90x50mm_v7_slim.stl | 275.4KB | |
| parametric_business_card_case_90x55mm_v5.stl | 210.6KB | |
| parametric_business_card_case_90x55mm_v7_slim.stl | 282.5KB |
