Busch Jaeger Duro 2000 Frame Insert 3D Printer Model
The file 'Busch Jaeger Duro 2000 Frame Insert 3D Printer Model' is (step,FCStd,stl) file type, size is 204.3KB.
The file 'Busch Jaeger Duro 2000 Frame Insert 3D Printer Model' is (step,FCStd,stl) file type, size is 204.3KB.
Hi,
this is an insert for the Busch Jaeger Duro 2000 switch series.
It clips directly on the frame and has no additional fasteners.
So, it is primarily designed to cover empty slots in a multi frame.
It can also be used if you want to create your own DIY inserts.
I also included an insert with centered 10mm hole since I used the insert to route a cable through the hole.
Please be aware that you are not supposed to tamper with your electric’s installation on your own, so be carful when you are using this design.
| BuschJaegerDuro2000Insert-Insert_10mm_hole.step | 216.9KB | |
| BuschJaegerDuro2000Insert-Insert_full.step | 213.1KB | |
| BuschJaegerDuro2000Insert.FCStd | 118.3KB | |
| Insert_10mm_hole.stl | 55.6KB | |
| Insert_full.stl | 50.3KB |
