Bunny Base For Rabbit Pulling Carrot Doorstop 3D Printer Model
The file 'Bunny Base For Rabbit Pulling Carrot Doorstop 3D Printer Model' is (stl) file type, size is 2.6MB.
The file 'Bunny Base For Rabbit Pulling Carrot Doorstop 3D Printer Model' is (stl) file type, size is 2.6MB.
Our bunny was just a little to short for the gap under our door, and PLA slips easily on tile. So we gave her a little base to lift her up and give her a little more traction. These parts are based on the Bunny Rabbit Pulling Carrot Doorstop model by CaptObvious.
This is printed in Flexfill 98a. With 0.2mm layers and a 0.6mm nozzle it took about 3 hours to print. Flexible materials print very slowly. Super glue seems to be holding it all together well so far. I clamped it in a (printed) vise while it set.
This STL file is 10mm tall, which should be more than enough for most door gaps. The photos show a 5mm printed height. There is plenty of software out there that should be able to do a basic plane cut so that you can choose the exact height you need without needing any complicated software. Your slicer may even have a plane cut feature.
| bunnyBottom.stl | 3.6MB | |
| carrotBottom.stl | 6.4MB |
