The Bukobot Fly was originally made to test out some features of my Bukobot 3D printer prototype and experiment with thin layers. Then I got curious to see if I can actually make it fly..and I did!
First 3D printable hand glider?
Not sure if it's the first flying 3D printable mini airplane, but I couldn't find one anywhere that was small enough to fit on 8x8 platform and didn't require motors.
The Bukobot Fly has a 9" wingspan and 0.4mm thick wings.
VERY CHALLENGING PRINT!!!
This might be a tough print to do. It took me a few tries to get a decent first layer for the wings because the crappy PLA I had was very inconsistant in thickness... But if your platform is level and your material is good, it should work. Layer height should be set to about 0.1mm with a very flat platform and I recommend using PLA for the stiffness. Also, platform needs to be at least 7x7 inches to print at 100% size, not sure if it'll work any smaller, but should work bigger possibly.
Printed on a Bukobot 3D printer http://www.thingiverse.com/thing:21746
UPDATE!!! I got video of it flying!!!
| Bukobot_Fly_1.0.scad | 3.4KB | |
| Bukobot_Fly_1.0.stl | 750.6KB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
