Building – Inn 3D Printer Model
The file 'Building – Inn 3D Printer Model' is (stl) file type, size is 81.6 MB.
The file 'Building – Inn 3D Printer Model' is (stl) file type, size is 81.6 MB.
May 2024 Update: New STLs uploaded. I cut the roof off for easier printing and so that the inside can be used. Let me know how it prints. I believe I fixed all the previous errors, but let me know if you are still getting errors.
Here is another building I created. Let me know how it prints, as I don’t yet have a 3d printer. All models are designed for dnd size (1 inch, 25mm) miniatures.
As some of you may already be aware, my meshes are not one continuous mesh, but rather a bunch of meshes overlapping. The reason I did this is because it takes so much longer to create anything if you have to boolean everything together. Besides, those who have printed my models have not had any issues with this. That being said, please let me know if you are having issues with printing due to the overlapping meshes.
Also, please let me know if I need to cut the building in half to make printing easier.
| 25mm_-_House_-_Inn_Bottom.stl |
| 25mm_-_House_-_Inn_Roof.stl |
