Building Block Base Plate Letters 3D Printer Model
The file 'Building Block Base Plate Letters 3D Printer Model' is (stl) file type, size is 18.3MB.
The file 'Building Block Base Plate Letters 3D Printer Model' is (stl) file type, size is 18.3MB.
I built up the whole alphabet of baseplate lego letters for you to print.. do not resize or they will not connect to lego bricks.... no i didnt include the back pieces.
I was just sick and tired of everyone charging big money for these so here you go world they are free..
message me if you want my Lego grid do legofy anything you want or instructions on how to incorporate the design
follow me on tik tok @North.Light1
if you have any other requests please like, follow me and let me know... also let me know if there are any issues. I tested out spacing and should be the same on every piece
| Letter_A.stl | 2.7MB | |
| Letter_B.stl | 3.3MB | |
| Letter_C.stl | 1.8MB | |
| Letter_D.stl | 3.9MB | |
| Letter_E.stl | 3.6MB | |
| Letter_F.stl | 2.9MB | |
| Letter_G.stl | 2.7MB | |
| Letter_H.stl | 2.7MB | |
| Letter_I.stl | 2.6MB | |
| Letter_J.stl | 2.2MB | |
| Letter_K.stl | 2.8MB | |
| Letter_L.stl | 2.4MB | |
| Letter_M.stl | 3.3MB | |
| Letter_N.stl | 3.5MB | |
| Letter_O.stl | 2.5MB | |
| Letter_P.stl | 3.0MB | |
| Letter_Q.stl | 3.3MB | |
| Letter_R.stl | 4.2MB | |
| Letter_S.stl | 3.6MB | |
| Letter_T.stl | 3.3MB | |
| Letter_U.stl | 2.9MB | |
| Letter_V.stl | 1.9MB | |
| Letter_X.stl | 3.0MB | |
| Letter_Y.stl | 2.7MB | |
| Letter_Z.stl | 2.8MB |
