Build Plate Holder – Under Desk/Wall Mount 3D Printer Model
The file 'Build Plate Holder – Under Desk/Wall Mount 3D Printer Model' is (stl,3mf) file type, size is 248.9KB.
The file 'Build Plate Holder – Under Desk/Wall Mount 3D Printer Model' is (stl,3mf) file type, size is 248.9KB.
Simple and adaptable system for keeping your construction dishes.
The two pieces are printed separately, so you can store plates of any size (minimum size 40mm).
You can keep up to 3 different building plates easily under your handy desk or under a shelf.
If you have space you can print 2 adapters to mount it to the wall at a 3-degree angle.
Recommended screw: maximum head diameter: 6.5mm (example in the last picture)
Print files in 3mf and stl format are provided.
Optimal printing parameters are already set in the 3mf format.
In case stl format is used, the following parameters are recommended:
infill: gyroid
wall loops: 3
Bottom layers: 4
If necessary add brim for edge adhesion:
OrcaSlicer: mouse ear
brim ear max angle: 180
brim ear detection radius: 0
Printed in PLA Sunlu Meta. If installed in places highly exposed to sun and heat it is recommended to use PETG or even better ABS.
| UnderDesk_PlateHolder_2.0.stl | 95.8KB | |
| UnderDesk_PlateHolder_2.0_generic.3mf | 52.9KB | |
| UnderDesk_PlateHolder_2.0_wall_3deg_Adapter.stl | 153.8KB | |
| UnderDesk_PlateHolder_2.0_Wall_3deg_Adapter_generic.3mf | 74.5KB | |
| Wall_3deg_Adapter.stl | 58.1KB | |
| Wall_3deg_Adapter_generic.3mf | 43.0KB |
