Laser holder for bug-a-salt
Version A without screws - only clip. Made for laser diameter 19mm - the clip diameter is 18mm, so it sits very tight.
Version B with screws, you will need 3 screws M5x20mm (or M5x25mm) with M5 nuts. Made for 19mm laser diameter, but it`s adjustable, so I think, that laser diameter between 16,5mm and 19,5mm could work.
IMPORTANT NOTE: the axis of the holder is parallel to the barrel's axis, so you NEED a laser with an adjustable beam angle, see pictures for the details. It works only if you can adjust the axis of the laser.
| bugasalt_laser_holder_version_A_clip_without_screws_v4.3mf | 127.4KB | |
| bugasalt_laser_holder_version_A_clip_without_screws_v4.f3d | 134.5KB | |
| bugasalt_laser_holder_version_A_clip_without_screws_v4.stl | 81.3KB | |
| bugasalt_laser_holder_version_B_clip_with_screws_v2.stl | 109.8KB | |
| bugasalt_laser_holder_version_B_clip_with_screws_v3.3mf | 150.9KB | |
| bugasalt_laser_holder_version_B_clip_with_screws_v3.f3d | 146.7KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
