This is a SPIDER KILLER! (or bug killer) the idea is that you have a 40mm fan between all the components and some other electrical components so that the fan will suck in the bugs and smash them against the fan and then discard the through out the back! and in the back you can attach a bag of some sort to catch the bugs, just make sure that air can go through the bag with a couple of holes in the bag or something.
This 3D print is in super early beta and i do not know if it will work, you attach all the components with zip-ties.
i'll have ebay links down below for what hardware i'll use.
Things that you will need:
40mm fan, 40x40x28 with the holes at 32mm between them,
,9volt battery
, 9volt battery snap on connecter
, button
, soldering equipment or electrical tejp, zip ties.
If you have any questions please post them in the comments and i'll answer as fast as i can.
| 9v_cover.stl | 1.4MB | |
| back_housing.stl | 1.8MB | |
| fan_cover.stl | 169.8KB | |
| housingpart1.stl | 513.2KB |
