This came from a need to stop my small power supply from being loose on the desk. I wanted a more square retro-ish look for the unit and this was what came to mind. The banana plug holes are what I understand to be a semi-standard distance center to center at .750in or 19mm. The hole for the DC barrel plug that is in prime location for gluing it to an adjacent interior wall for stability, when using the barrel plug from sparkfun linked below. I left ample room for wires, with the cutout on the bottom side of the PS holding area preventing pinching when installing.
150mm L x 62mm D x 75mm H
| powerbox_v9.stl | 50.4KB |
