Brushless Whoop! 0703&1103 Motors 3D Printer Model
The file 'Brushless Whoop! 0703&1103 Motors 3D Printer Model' is (stl,stp) file type, size is 636.8KB.
The file 'Brushless Whoop! 0703&1103 Motors 3D Printer Model' is (stl,stp) file type, size is 636.8KB.
This is a tiny whoop alike airframe which can be 3D printed.
It is in the testing phase at the moment so please go ahead, print, fly and tell me what to improve!
PLEASE NOTE!! The FC and ESC board we will be using for this project are both sold by Banggood under the racerstar brand name. BUT originally these electronics where designed by Fishpepper, So all credits go to: http://fishpepper.de/projects/pepperf1sh/
The frame is designed to fit the following equipment:
-or-
Very cheap 4in1 4A ESC: https://www.banggood.com/Only-2g-16x16mm-Racerstar-Star4-4A-1S-Blheli_S-4-in-1-Brushless-ESC-D-Shot-Ready-for-Racing-Drone-p-1135544.html?cur_warehouse=CN
If you prefer flying on 2S: https://www.banggood.com/16x16mm-Racerstar-Star6-6A-Blheli_S-1-2S-Dshot600-Ready-4-In-1-ESC-for-FPV-Racing-p-1160389.html?rmmds=myorder&cur_warehouse=CN
Flight controller: https://www.banggood.com/Racerstar-F3D8-16X16mm-Micro-F3-Flight-Control-Board-Built-in-8CH-SUBS-Receiver-for-Frsky-X9D-Plus-p-1136734.html .
Optionally you can add a mini camera and VTX like these:
Note: Most video transmitters are 1s only, this means you will need to add preferably a pololu (because small and light) to change the voltage level!
Have fun!
Update tracklog:
V1.0 Initial release
V1.1 Changed the 0703 frames mounts to fit both Racerstar and Sunnysky 0703 motors.
| Tiny_Whoop_printed_frame_0703_motors_46mm_props_V1.1.stl | 688.0KB | |
| Tiny_Whoop_printed_frame_0703_motors_46mm_props_V1.1.stp | 471.0KB | |
| Tiny_Whoop_printed_frame_1103_motors_46mm_props.stl | 814.8KB | |
| Tiny_Whoop_printed_frame_1103_motors_46mm_props.stp | 487.0KB |
