Brushless Turbine Air Pump ( Supercharger) 3D Printer Model
The file 'Brushless Turbine Air Pump ( Supercharger) 3D Printer Model' is (stl) file type, size is 4.3MB.
The file 'Brushless Turbine Air Pump ( Supercharger) 3D Printer Model' is (stl) file type, size is 4.3MB.
2212 powered turbine air pump ( supercharger) with different impellers .
all parts are printed from petg ( I would recommend that or greater)
it also needs the propeller to shaft adapter that comes with the cheap amazon / ebay brush less motors .
requires 5 pc m3x 6 fasteners
and the hardware to attach the motor to the backing plate .( may be specific to your motor)
check out the geared version intended to be attached to an engine :https://youtu.be/zlEuIVXfvKg
| flanged_intake_housing.stl | 7.2MB | |
| less_agressive_slightly_smaller_wheell.stl | 3.5MB | |
| middle_agressive_impeller_my_prefered.stl | 1.2MB | |
| motor_mount_backing_plate2212.stl | 209.3KB | |
| super_agressive_impellerlowflow_higherPressure.stl | 1.4MB | |
| turbine_housing.stl | 6.2MB |
![3D Printable Pallet Town [ Pokemon! ] 3D Printer Model](https://cdn.3axis.co/assets/45/ee/aa/1c/45eeaa1c-18b3-46e5-8ceb-26b23a7521c7/images/21cf5b03-7f07-4037-ae00-fd726bccba7d_thumb.jpg)