Brushless Micro Quad For 1103 Motors 2 In. Props 26×26 AIO Flight Controller 3D Printer Model
The file 'Brushless Micro Quad For 1103 Motors 2 In. Props 26×26 AIO Flight Controller 3D Printer Model' is (stl) file type, size is 241.3KB.
The file 'Brushless Micro Quad For 1103 Motors 2 In. Props 26×26 AIO Flight Controller 3D Printer Model' is (stl) file type, size is 241.3KB.
This is my first shot at making a quadcopter/drone frame for FPV. I'm using brushless 1103 motors, and a BETAFPV F4 AIO flight controller with 26x26 mounting pattern.
Print two of the legs/battery holder. I used tree supports at 60 degrees and a brim and they came out great. A 600MaH battery fits perfectly or you can use rubber bands for a smaller battery.
Camera holder is still WIP but I use a rubber band around the frame in an X pattern over the camera and it stays put even in crashes.
Uses 2-3mm hardware to assemble, the 4 screws of the main frame are used to mount the camera holder as well as the legs. No nuts needed.
| 1103BrushlessQuadv1.stl | 511.4KB | |
| BOSSHOGLEGSV2.stl | 404.0KB | |
| CameraHolder4.stl | 109.5KB |
