Bruder Conveyor Electric Project 1/16 3D Printer Model
The file 'Bruder Conveyor Electric Project 1/16 3D Printer Model' is (stl) file type, size is 213.6KB.
The file 'Bruder Conveyor Electric Project 1/16 3D Printer Model' is (stl) file type, size is 213.6KB.
My first design upload -
Bruder Conveyor Electric conversion
With the least parts possible - simple build with some additional items.
Requires 4x printed parts (5 with bucket fill extension) and 4 component.
How to video https://www.youtube.com/watch?v=OqsTBxN9AOA
I have left the STL file raw and I have not meshed it - feel free to make changes where suits!
Note: This is Revision 1 and it may have different variants of the extension bucket in the future with more angle.
Note : I wanted to used the adaptor that came with the servo to give better strength on the connection between the servo and the spindle, and not use the 3D printed part on the cog/gear connection due to wear.
Details of screw sizes on youtube vid + parts required. (360 servo , battery tray, bolts/nuts + Alu angle for the sides - 10x10mm x 1mm)
Peace out ! Happy building !
Please note: That the Servo bracket inspiration was taken from https://www.thingiverse.com/thing:5446611 (Mbouhabib1 account) I am not sure how to tag a single item in the remix tab.
Please Note: reports of sizing issue for adaptor : set for 10% scale - so the X axis is 20.5mm
| Bat_Clip_Rev1_Scotty.stl | 18.1KB | |
| Bruder_Conveyor_adaptor_Rev1_Scotty.stl | 345.2KB | |
| BRUDER_SERVO_MOUNT_Rev_1_Scotty.stl | 300.7KB | |
| Bucket_Fill_extension_Rev1_Scotty.stl | 21.6KB | |
| Servo_cover_Rev1_Scotty.stl | 137.7KB |
