Broadsword full length 1m. Supports only needed for the Hilt and maybe the Pommel. No part is taller than 20cm for printing on smaller printers.
inside I have made holes for strengthening rods they have a diameter of 5.5mm. The rods i used are 5mm and they work fine.
Blade_2_5.5.stl | 71.8KB | |
Blade_3_5.5.stl | 67.1KB | |
Blade_4_5.5.stl | 67.1KB | |
Blade_5_5.5.stl | 42.7KB | |
Handle_5.5.stl | 355.7KB | |
Hilt-Blade_1_5.5.stl | 4.5MB | |
Pommel_5.5.stl | 464.8KB |